FAN WALL CONTROL
Turn on the power and check the operation of the fan.
• OFF Position – fan off
• 3rd Position – low medium fan speed
• 2nd Position – medium fan speed
• 1st Position – high fan speed
Light Control
• Toggle Switch – on/off
REVERSING SWITCH
Your ceiling can operate either in fan mode or reverse fan mode.
NOTE: to change the direction of the rotation of the blades the fan must not be operating.
The Reverse switch is located on the top of the motor housing. Slide the switch to the left for warm weather
operation. Slide the switch to the right for cool weather operation.
Warm Weather (forward)
A DOWNWARD airflow creates a cooling effect as shown in Figure 16. This allows you to set your air
conditioner on a warmer setting without affecting your comfort.
Cool Weather (Reverse)
An UPWARD airflow moves warmer air off the ceiling area as shown in Figure 17. This allows you to set your
heating unit on a cooler setting without affecting your comfort.
SUMMER OPERATION
Fig. 16
USING YOUR CEILING FAN
12
WINTER OPERATION
Fig. 17
Fig. 15