Publicidad
Installation
1 Pull out the external power cable, BNC cable and communications cable
(for connecting to the "camera") through the rear of the Wall Mount
Adaptor into the Pipe.
Then, it is recommended to keep the cables in a distance of about 100 mm from
the pipe.
2 Secure the Wall Mount Adaptor to the wall, corner or pole using the
"Anchor Bolts or Nuts (M10)".
When installing the product on a corner of the wall, use the Corner Mount Adaptor
(SBP-300KM) and use the Pole Mount Adaptor (SBP-300PM) for a pole.
When installing the product on a wall, mark and drill 4 holes into the Wall Mount
Adaptor and insert the Anchor Bolts or Nuts (M10) before installation.
Anchor Bolts
Wall Mount Adaptor
3 Mount the Camera set on the Pipe.
Install the camera according to the camera's installation guide.
Product Specifications
~
Weight : 730g
Material : Aluminum
~
~
Operation temp. : -50°C~60°C
~
Operation hum. : 0~100%
~
Poids : 730g
~
Matériau : Aluminium
Température de fonctionnement :
~
-50°C~60°C
~
Humidité de fonctionnement :
0~100%
~
Gewicht : 730g
~
Material : Aluminium
Betriebstemperatur : -50°C~60°C
~
~
Betriebsluftfeuchte : 0~100%
Peso : 730g
~
~
Material : Aluminio
~
Temp. funcionamiento : -50°C~60°C
Hum. funcionamiento. : 0~100%
~
Peso : 730g
~
Materiale : Alluminio
~
~
Temperatura di esercizio : -50°C~60°C
Camera set
~
Umidità di esercizio : 0~100%
~
Вес : 730g
~
Материал : Алюминий
Температура при работе :
~
-50°C~60°C
~
Влажность при работе : 0~100%
Product Outline
~
Ciężar : 730g
Materiał : Aluminium
~
~
Temperatura robocza : -50°C~60°C
~
Wilgotność robocza : 0~100%
~
Ağırlık : 730g
~
Malzeme : Alüminyum
Çalışma sıcaklığı : -50°C~60°C
~
Çalışma nem değeri : 0~100%
~
~
Hmotnost : 730g
~
Materiál : Hliník
Provozní teplota : -50°C~60°C
~
~
Provozní vlhkost : 0~100%
重量 : 730g
~
材質 : アルミニウム
~
動作温度 : -50°C~60°C
~
動作湿度 : 0~100%
~
重量 : 730g
~
材料 : 铝
~
~
工作温度 : -50°C~60°C
~
工作湿度 : 0~100%
~
무게 : 730g
~
재질 : Aluminum
~
사용 온도 : -50℃~60℃
~
사용 습도 : 0~100%
执行标准：Q/12JD5708
PT01-005154B
Publicidad
