OBJ_BUCH-1237-004.book Page 10 Monday, September 16, 2013 11:29 AM
10 | English
In case of excessive loading, e. g., prolonged blocking
of the application tool, the electronics switch off the
power tool. After switching on again, the power tool
can be used again as intended for. In case of continued
overload, the power tool will switch off again in order
to prevent damage to the motor.
To save energy, only switch the power tool on when using it.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.
Symbol
Meaning
GSR 14,4 VE-2-LI/
GSR 18 VE-2-LI/
GSB 14,4 VE-2-LI/
GSB 18 VE-2-LI: Cordless screwdriver/
Combination cordless drill
Grey-marked area: Handle
(insulated gripping surface)
Article number
Read all safety warnings and all instruc-
tions
Before any work on the machine itself,
remove the battery
Always wear ear protection.
Movement direction
Reaction direction
Drilling and screwdriving
Impact drilling
Low speed
High speed
1 609 92A 0C0 | (16.9.13)
Symbol
Meaning
Switching On
Switching Off
Prohibited action
Right/left rotation
Battery Capacity
U
Rated voltage
n
Impact rate
S
n
1
No-load speed (1. gear)
0
n
2
No-load speed (2. gear)
0
M
Maximum torque according to ISO 5393
Metal
Brickwork
Wood
Ø
Drilling diameter, max.
Ø
Max. screw dia.
Chuck clamping range
Weight according to EPTA-Procedure
01/2003
*
Value dependent of the battery pack
being used
L
Sound pressure level
pA
L
Sound power level
wA
K
Uncertainty
a
Vibration total value
h
Delivery Scope
Cordless screwdriver/Combination cordless drill.
Battery, application tools and other accessories shown or
described are not part of the standard delivery scope.
A complete overview of accessories can be found in our ac-
cessories program.
Intended Use
The machine is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramics and plastic.
GSB machines are additionally intended for impact drilling in
bricks, brickwork and masonry.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
Bosch Power Tools