Child Lock - Klarstein Hot Spot Crystal IR Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

EN
26
Automatic mode/setpoint temperature maintenance
1. In S mode, a preset target temperature is maintained.
Press the SET button to enter the S mode. (Mode indicator S lights up).
The current room temperature is displayed on the left of the main display. The set t
arget temperature is shown on the right of the display.
• Set the target literature using the keys ∧ and ∨.
• If the room temperature is equal to the setpoint temperature, the heating mode
switches off.
• If the room temperature drops below 2 -c of the setpoint temperature, the weak
heating mode is switched on (low heat indicator (9) lights up).
If the room temperature drops below 4 -c of the setpoint temperature, the strong heating
operation is switched on (indicator for strong heating power (10) lights up).
Starting heating operation manually
If required, you can start heating operation manually with low or high heating power.
1. Press the SET button to enter the S mode. (Mode indicator S lights up).
2. Start the heating mode by pressing the key
between low and high heating power. The current heating capacity can be seen
from the indicators for low heating capacity (9) and high heating capacity (10).
3. To end the manually started heating process, press the SET key to exit P mode.
Start switch-off timer
In S mode, you can set a countdown after which the heating process is automatically
switched off.
1. Press the MODE button to display the current countdown (right in the main display).
Note: After 10 seconds without input, the main display returns to the display of room
and setpoint temperature.
2. Press the MODE button to extend the countdown by one hour.
Childlock
To prevent accidental operation by children, you can activate a childlock. When
childlock is activated, the product does not respond at the touch of a button.
• Press and hold the button
• When the childlock is activated, the childlock indicator (1 1) lights up.
. Press the button
for 5 seconds to turn the childlock on or off.
again to switch

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

1003294210032943

Tabla de contenido