Panasonic ER-GB44 Instrucciones De Operación página 17

Lubrication
• Apply the oil to the blade before and after each use.
1
1
Remove the blade.
(See this page.)
2
2 Apply a drop of the oil to
each indicated point.
3
3
Attach the blade to the
main body, turn on the
power and allow to run
for approximately 5
seconds.
► Replacement parts
Replacement part is available at your dealer or
Service Centre.
Replacement parts for
ER-GB44/ER-GB43
• Do not use any blade other than the one dedicated as
it may cause defect in performance.
• We recommend Panasonic oil WES003.
Blade WER9606
Oil WES003
Removing the blade
Hold the main body, place your
thumb against the blades, and
then push them away from the
main body.
Mounting the blade
Fit the mounting hook into the blade mounting on the
main body, and then push in until you hear a click.
17