EdilKamin H2OCEANO 23 Instalación Uso Y Mantenimiento página 31

SYSTEM FOR AN OPEN TANK INSTALLATION
AN EXAMPLE OF A HYDRAULIC SYSTEM FOR A THERMO FIREPLACEITH HOT SANITARY WATER PRO-
DUCTION AND A WALL MOUNTED BOILER USING
Elec-
tricity
Mains
Kit 3 is designed to facilitate the work carried out by the installers. In fact, it consists of all the necessary components for the
product to be properly installed.
NB: insulating mats must be applied so that the components of the kit are well-protected from the heat radiation emitted
by the thermo- replace.
Electrical Connections
Power Supply
230 Vac
Circulator A
THE INLET AND OUTLET PIPES MUST BE CROSSED FOR THIS TO FUNCTION PROPERLY
Regulator
(included in the kit)
Fuse
Display
20 - 80° C
Valve Setting
Circulator enabled
Overheating alarm
3-way valve
Circulator Setting
20 - 80° C
Flow Switch
normally closed contact
3-way valve
Circulator B
KIT 3
OFF
ON
Enable
Disable
Acoustic
Alarm
Sensor (insert in the
appropriate well)
- 31
-
ACS:
Hot Sanitary Water
AF: Cold Water
CA: Wall Mounted Boiler
EV:
3-way Solenoid Valve
F: Flow Switch
MI:
System Flow
NA: Normally Open
NC: Normally Closed
P:
Pump (circulator)
RA: Radiators
RE:
Electronic Regulator
RI: System Return
S: Drain
Sc 20:
20-plate Heat Exchanger
Sc 30: 30-plate Heat Exchanger
TC:
Thermo Fireplace
V: Valve
VE: Open Expansion Tank
VR:
Check Valve
VSP: 1.5 bar Pressurized Safety Valve
VST:
Thermal Relief Valve
Ja: Automatic Relief Valve
1. 1" Male-Female Brass Collector
2. 1" Ball Valve
3. Circulator with 1½" Fasteners (219660)
1" Check Valve (261910)
5. 1" Male-Female 3-way Solenoid Valve
6. Copper Fittings
7. 30-plate Heat Exchanger for heat transfer
with the gas boiler circuit (216620)
8. 20-plate Heat Exchanger for hot sanitary
water production (205270)
9.
10.
11. Flow Switch (220830)
12. ½" Thermometer Well + Sensor (175960)
13. Electronic Regulator (220780)
A ¾" System Return
B ¾" System Flow
C ¾" Fireplace Return
D 1" Fireplace Flow
E ½" Cold Sanitary Water
F ½" Hot Sanitary Water
SELECTOR FUNCTIONS
Selector: OFF
Everything is switched off
Selector: MAN Driven Circulator
Valve is set
Selector: AUTO Circulator is set
Valve is set
Alarm selection
No acoustic signal in the
OFF position
KIT 3 code 261900