Operating Instructions - Altrad BELLE RPX 35/40 Manual Del Operador

GB
• Take the compactor to where it is required.
or slings ONLY to the lifting point (Item 4 of the Machine Description) on the top of the compactor.
• Moving the compactor using the integrated wheel kit
• Use the Fixed Steering Handle (Item 7) to tilt the machine backwards onto the integrated wheels (Item 11).
•
•
counter balance.
CAUTION
• Having carried out the checks listed in the 'Pre Start' section, you may start the engine.
the gearbox.
should be set to maximum.
• Set the throttle to maximum and use the control handle for direction and to steer or turn the compactor.
During normal operation you should not have to push the compactor but allow it to travel at its own pace.
The speed of travel will be determined by the condition of the surface being compacted.
Caution must be used when operating the compactor in reverse. Ensure that there are no obstructions or trip hazards when
operating in reverse.
compactor's weight. Work up and down a slope not across.
• Work the compactor over the surface in an organised pattern until the required compaction has been achieved.
CAUTION
CAUTION

Operating Instructions

NEVER leave the engine running whilst the machine is being manouvered on its wheels.
DO NOT operate the machine in reverse on an incline.
DO NOT operate in reverse up to an enclosed or restictive space.
DO NOT
the engine and drive system.
(Item 9) and allow the machine to lower using your body weight as a
22