Declaration Of Conformity; Environmental Recommendations; Usage Recommendations - Adeunis RF ARF868 Guia Del Usuario

ARF868 Radio Modems - User guide version V1.6

Declaration of conformity

Radio modem ARF868
We ADEUNIS RF
283 rue LOUIS NEEL
38920 CROLLES FRANCE
declare under our own responsibility that the products
Name ARF868
Reference ARF7940, 7941, 7942, 7943
to which this declaration refers conforms with the relevant standards or other standardising documents:
• EN 300 220-2 (V2.3.1) (2010-02) & V2.4.x (2012)
• EN 60950-1 (2001) + A11 (2004)
• EN62311 (2008)
• EN301 489-1 (v1.8.1) (2008-04)
• EN 301 489-3 (v1.4.1) (2002-08)
According to the RTTE Directive 99/5/EC
Notes:
• According to the 1999/519/EC «RF signal» recommendations, a minimum distance of 10cm between the product and the body is required.
• Receiver class (if applicable): 2
Crolles, January 6th, 2012

Environmental recommendations

All unnecessary packing materials have been eliminated. We have made every possible effort to ensure that the packaging can easily be
separated into three types of materials: cardboard (box), expandable polystyrene (buffer material) and polyethylene (bags and protective foam
layer). Your appliance is composed of materials that can be recycled and reused if it is dismantled by a specialist company. Please respect local
regulations concerning the method of disposal of old packaging materials, worn out batteries and your previous equipment.

Usage recommendations

Caution
• Avoid proximity of less than 3 m with an electronic appliance (PC, portable telephone, etc.) which could affect the high sensitivity of the
modem and consequently reduce its effective range.
• Before using the system, check that the supply voltage specified in its user manual corresponds to your power source. If this is not the case
consult your supplier.
• Place the appliance against a flat firm and stable surface.
• The appliance should be installed in a location that is sufficiently ventilated to eliminate any risk of internal overheating and should not be
covered by objects such as newspapers, cloths, curtains, etc.
• The appliance's aerial should be in the open and at least 10 cm clear of any conducting material
• The appliance should never be exposed to sources of heat such as heating appliances.
• Do not place the appliance close to objects producing open flames such as candles, welding torches, etc.
• The appliance should not be exposed to aggressive chemical products or solvents that could affect the plastic materials or corrode metal
components.
• Install your appliance close to its DC power source.
• Avoid using electrical extension leads and RS232 more than 3m long.
• When connecting the appliance to a PC (use of a USB-series gateway), there will be no automatic detection of the product. You should run
a search for the available «port com».
VINCENT Hervé - CEO
Page 3 of 25