Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT
The appliance is provided with a temperature sensor in its bottom to measure the current temperature. Do not
damage this sensor in a violent manner. A precise temperature measurement is important for keeping
Cooking Process
• Close the fruit preserver with the lid. Adjust the temperature control-
ler to the desired heating level. Use the following tables when selec-
ting a temperature setting.
• When the preserving phase is finished, switch the temperature cont-
roller to OFF. Remove the power plug from the wall socket.
• Position a heat resistent container under the pouring tap and press
the pouring lever down. The water drains itself. When the water has
drained away allow the preserving jars to cool down.
Workflow
• Set the Start/Stop knob to the desired temperature as indicated in the reference chart for preserving. Set
the indicated time for preserving and press on the Start/Stop knob. The heat symbol
preserver will now start heating up. The duration for heating up can be up to 90 minutes. The timer starts
counting down, when pre set temperature is reached
• All settings may also be corrected during operation. Just switch off the appliance, press on the Start/Stop
knob to do so, and then re-set the desired setting. Any remaining water in the preserver can be removed
through the outlet tap. Put a heat-resistant container under the outlet tap and press down the outlet tap' s
lever. The water will be drained. Allow the preserver to cool down once the water has been removed.
• Remove the bottling jars. Leave the clamps or other lid fasteners on the bottling jars until they have com-
pletely cooled down.
Juice Extractor Setting
• The boiling machine is ideal for juicing when using a juicer attachment (not included). To ensure maximum
steam generation, set the start/stop control to the maximum temperature until the following symbol ap-
pears:
.
• Switch off the time electronics by pressing the timer button. The following symbol will appear:
• Place the juicer attachment on top and fill with at least 6 litres of water. Load the fruit basket and put on
the lid.
• Press the start/stop button to turn on the appliance. The appliance will now heat up to the maximum setting
and produce the steam required for juicing.
• Attention! Switch off the appliance after juicing by pressing the start/stop control.
• Fill up with water before each new juicing process.
14
.
appears, the
.
Publicidad
Tabla de contenido
