Description Of The Kit; Safety Notices; Optional Module Description - WEG SSW-07 Guía De Instalación, Configuración Y Operación

1. dESCriPtioN oF tHE Kit

Contents:
SSW-07/SSW-08 motor PTC kit (Part number: 10413867)
Quantity

2. SAFEtY NotiCES

AttENtioN!
Switch off the soft-starter SSW-07/SSW-08 before installing the motor
PTC kit.
The electronic boards have components that are susceptible to electrostatic
discharge. Never touch any of the electrical components or connectors
without following the proper grounding procedures. If it is necessary to do
so, touch the grounded heatsink or use a suitable grounded wrist strap.

3. oPtioNAl ModUlE dESCriPtioN

This optional module allows the connection of the motor thermistor to the
soft-starter.
The motor PTC kit is connected directly to the soft-starter. It is fitted into the
front cover slot for optional plug-in modules.
The tables 2 and 3 present information on the actuation level and the terminal
strip description respectively.
 Error trip: 3k9 Release: 2k4
 Minimum resistance: 80 Ω
Table 1 - Contents of the kit
Description
1 Motor PTC optional plug-in module
Table 2 - Actuation level specification
Motor PTC actuation level specification
Table 3 - Terminal strip description
Description of the motor PTC kit connector
Terminal
1
2
3
4
Description
Not connected
PTC A
PTC B
Not connected
5