Battery Replacement - TFA 30.5021 Instrucciones Para El Manejo

TFA_No. 30.5021_Anleit_11_12
STYLE
– Digital Thermo-Hygrometer
7. Setting of clock
• After battery was activated or press and hold SET button for 3 seconds,
you will enter the time setting mode.
• The hour digit is flashing.
• Press SWITCH button to adjust the hours.
• Press SET button again and set minutes in the same way.
• Hold and press the button for a fast count.
• Press SET button to confirm it.
8. Temperature display
• Press SET button to change between °C (Celsius) or °F (Fahrenheit) as tem-
perature unit in normal mode.
• With Fahrenheit as temperature unit, the clock automatically switches to
the 12 HR system (PM appears on the display after noon).
9. MAX/MIN values
• Press MAX/MIN button.
• MAX appears on the display. The maximum temperature and humidity are
displayed.
• Press the button again.
• MIN appears on the display. The minimum temperature and humidity are
displayed.
• Press MAX/MIN button again to return to normal mode.
• Press SET button in the respective mode to clear the recorded MAX/MIN
reading.
• --.- °C and --.- % appear on the display.
14
07.11.2012 13:28 Uhr Seite 8
STYLE
– Digital Thermo-Hygrometer
10. Comfort zone
• On the display appears a smiling face icon to indicate the comfort level of
indoor climate (humidity 40%...60%).
11. Display
• Using the SWITCH button, you can choose between the large-scale display
of temperature or humidity in normal mode.
12. Positioning and mounting
• With the removable leg the instrument can be placed onto any flat surface
or wall mounted at the desired location by the wall mounting hole at the
back of the unit.
13. Care and maintenance
• Clean it with a soft damp cloth. Do not use solvents or scouring agents.
• Remove the battery if you do not use the product for a lengthy period.
• Keep the instrument in a dry place.

13.1 Battery replacement

• Change the battery CR 2032 button cell when the battery symbol appears
on the display.
• Observe correct polarity (+ pole above).
15