System Components - Werner L100030 Instrucciones Para El Usuario

SYSTEM COMPONENTS

C L
OMPATIBILITY
All components and subsystems used with the Synthetic Rope Horizontal Lifeline
have been tested as part of a pre-engineered fl exible horizontal lifeline system.
Only components and subsystems approved by Werner Co. are to be used with
the Synthetic Rope Horizontal Lifeline.
A C
NCHORAGE ONNECTORS
D-B A
OLT NCHOR
The 5,000 pound (22.2kN) anchorage connector made from high
tensile steel and attaches to anchor structure with a 5⁄8 inch -11
x 2¼ inch Grade 8 hex cap bolt, 5⁄8 inch-11 Grade 8 hex nut and
a 5⁄8 inch high alloy medium split lock washer. (A320001-WB
includes bolt, nut and lock washer)
C A S
ROSS RM TRAP
Constructed with 1¾ inch
high strength polyester and 3
inch nylon, the 4 foot Cross
Arm Strap is designed to
wrap around a choke with the
12 inch soft loop to anchor
structures to creating a 5,000
pound (22.2kN) anchor point.
ACCESSORIES
B P : K120004
ACK ACK
The Back Pack is constructed of high strength polyester, with
a reinforced bottom to easily transport the Synthetic Rope
Horizontal Lifeline from job to job.
Page 8
IMITATIONS
: A320001-WB
: A111104