Publicidad
Idiomas disponibles
Idiomas disponibles
Tighten locking knob.
Note: lock must be in unlocked
position to tighten or loosen knob.
Remove dirt guard.
•
• turn key clockwise to unlock.
Extend arms.
pull the lever to release
the arms from locked-
down position.
CAUTION
Keep fingers away from
ALL moving parts!
Load heaviest bike first.
Always use
cradles closest
to vehicle.
1035681C-3/15
• Always load first bike with
chain away from vehicle.
• compress stabilizers against
bike frame.
• Stabilize the bike frame in the
cradle. Arrange bikes for best
stabilization.
Safety pin
is required
for use.
• Insert safety pin.
• tIghteN knob until there is
no more play between the
tongue and receiver.
• lock it.
• Replace dirt guard.
Raise arms
completely.
Arms will lock into
position.
A Yakima tubetop (see cover
page) may be required to carry
Failure to load
bikes properly can
result in property
damage, personal
injury, or death.
Bikes should be as level as possible
to avoid ground clearance issues and
Note: When
locked, the knob
will spin freely,
making it unable
to be loosened.
your bike safely.
possible ejections.
Publicidad
