Conditions Of Use - Festo DGC-8 63 Serie Instrucciones De Utilizacion

DGC
5

Conditions of use

Please note
Malfunctions will occur if the device is not used correctly.
S Ensure that the specifications in this chapter are always observed.
S Note the warnings and instructions on the product and in the relevant
operating instructions.
Compare the maximum values specified in these operating instructions with
S
your actual application (e.g. forces, torques, temperatures, masses).
The product can only be operated in accordance with the relevant safety guide
lines if the maximum loading limits are observed.
Observe the ambient conditions at your location.
S
Corrosive elements in the environment (e. g. ozone) will reduce the service life
of the product.
Please comply with national and local safety laws and regulations.
S
Use the product in its original state. Unauthorized modification is not
S
permitted.
Remove all transport packing such as foils, caps, cardboard.
S
Exceptions:
plugs on compressed air ports (danger of dirt entering the tubing)
the plastic cover on the aluminium guide rail (with DGC−...−G/GF).
The packaging is intended for recycling (except: oiled paper which must be
disposed of ).
Make sure there is a supply of correctly prepared compressed air (see Techni
S
cal specifications").
30
Festo DGC 0901d English