Function And Application; Conditions Of Use - Festo SLG Serie Instrucciones De Utilizacion

SLG−...
2

Function and application

By applying compressed air to the connec
tions alternately, the inner slide moves back
wards and forwards in the cylinder barrel.
By means of a fixed connection, the outer
slide also moves. A band system seals the
required slot in the cylinder barrel.
The component is designed for space−saving
mass transport only in slide mode.
The pressureless movement of the slide is
only permitted for rectifying faults and at low
speed.
If the speed is too high, the resulting low
pressure can pull the sealing band into the
piston chamber. This can lead to:
excessive leakage and
non−permitted accelerations (e.g. if fitted in a vertical position).
3

Conditions of use

Please note
Incorrect handling can lead to malfunctioning.
S Make sure that the points mentioned in this chapter are always observed.
The product will then function correctly and reliably.
Compare the limits in these operating instructions with your current applica
S
tion (e.g. pressures, forces, torques, masses, temperatures, speeds).
Only when the load limits are observed can the component function in accord
ance with the relevant safety guidelines.
Consider the ambient conditions at the location.
S
20
Ó Ó Ó Ó Ó
Ó Ó Ó Ó Ó
Fig. 2
Fig. 3: Slide mode
Fig. 4: Yoke mode
Festo SLG−... 0802d English