Pioneer LAN Guia De Inicio Rapido página 9

4
1 Click [General Setup].
2 Click [Wireless].
3 Click [Select Site Survey].
1
2
3
Item name
Wireless Module The wireless function operates all the time.
Mode The wireless LAN always operates in converter mode.
2.4 GHz (B): Communicates using IEEE802.11b only
2.4 GHz (G): Communicates using IEEE802.11g only
2.4 GHz (N): Communicates using IEEE802.11n only
Band
2.4 GHz (B+G): Communicates using IEEE802.11b and IEEE802.11g.
2.4 GHz (G+N): Communicates using IEEE802.11g and IEEE802.11n.
2.4 GHz (B+G+N): Communicates using IEEE802.11b, IEEE802.11g, and
IEEE802.11n. Users usually choose this setting.
Indicates the group name used to specify a specific wireless LAN
network and wireless LAN devices having the same ESSID communicate
ESSID
with each other. When SSID is selected for [Select Site Survey], ESSID
is set automatically.
When [Select Site Survey] is clicked, information for the devices
Site Survey connected to the wireless LAN is displayed so that you can check the
access point setup situation around the area.
Operation
Connecting to a Wireless LAN Router (Manual setting version) (continued)
Tip
If you changed the settings for [Advanced Settings], hold down the Reset/WPS button for
at least 10 seconds to return the setting to the default status.
5
1 From [Wireless Site Survey], select the same SSID (connection name) as
(1) in the table in "Checking the Network to be Connected" (page 7).
*Tick the [Select] radio button.
2 Click [Done].
1
2
9