Shower Reversibility; Base And Wall Panels Installation (Optional) - OVE Christelle Instrucciones

• This instruction is drawn up for an opening from right to left (see illustration A).
• For an installation from left to right (see illustration B), use the same instructions, but switch around the
panels: mirror effect.
Install the shower head on the door's side! This will reduce the risk of leaking.
A

BASE AND WALL PANELS INSTALLATION (OPTIONAL)

1. Install the 2 wall panels (E) and seal strip (O) together. Secure the 2 walls with wing nut kit (GG). Add
silicone at the junction of the 2 wall panels (E).
2. Place the wall panels on the base, drill holes through the bottom of the wall into the base with a ø1/8" (3mm)
drill bit and secure with screw (AA).
E

SHOWER REVERSIBILITY

1
GG
O
E
2
ø1/8"
3mm
AA
7
B