Kuppersbusch EEBP6260.0 Manual Del Usuario página 25

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Programming Cooking Time and Cooking
Stop Time
1 Touch the
symbol on the glass surfa-
ce. It will begin to flash. 0:00 will appear
on the display and the
up.
2 Touch the
or
me the cooking time.
3 2 beeps will then be heard. The
symbol will flash and the display will show
the time left before the oven switches off
automatically.
4 Touch the
symbol of the glass surface.
It will begin to flash. The current time will
appear on the display and the
will light up.
5 Touch the
or
me the cooking stop time.
6 This will be confirmed by two beeps. The
current time will show on the display and
the
symbol will light up.
7 Select a cooking function and tempera -
ture.
8 The oven will remain off with the
symbols lit up. The oven is program-
med.
9 When it is time to start cooking, the oven
will switch on and will operate for the pro-
grammed cooking time. The
will flash.
10.At the set stop time the oven will switch
off, an alarm will sound and the
symbols will flash.
and
will light
symbols to program-
and
symbols to program-
and
symbol
and
11.Touch any symbol to stop the signal. The
oven will turn on again.
12.Set the controls to 0 to turn off the oven.
You can change the timer setting while coo-
king. First touch the
touch the
or
Child Safety Function
To activate this function, touch the
and
symbols simultaneously. You will hear
one long beep and see a lit dot moving on the
clock display. The clock is locked.
Activating the child safety function with the
oven off (with control settings on 0) will stop
the oven from being turned on. If the safety
feature is activated with any cooking function
in operation, it will only lock the electronic
clock settings.
To deactivate the function, touch the
and
symbols simultaneously. You will hear
one long beep.
Caution
In the event of an electrical short circuit, all
the electronic clock programmed settings will
be cancelled and a 12:00 reading will flash on
the display. Reset the clock and programme.
or
symbols. Then
to change the set time.
,
,
25

Publicidad

Tabla de contenido
loading

Tabla de contenido