Manually Initiating The Reconditioning Process; Troubleshooting - Motorola IMPRES WPLN4182 Guia Del Usuario

98C30_ka.book Page 7 Monday, March 28, 2016 4:08 PM

Manually Initiating the Reconditioning Process

Within 2 and a half minutes of the initial insertion of an IMPRES battery
(STEADY RED indication), remove and reinsert the battery within 5
seconds to manually force reconditioning to occur. The charger indicator
changes from a STEADY RED to a STEADY ORANGE. This forces the
charger to recondition and automatically recharge the battery. This is a
useful feature to have when IMPRES batteries have been in storage for
several months or longer. Two or three manual recondition cycles may
be required to rejuvenate the batteries, due to long term storage
conditions.

TROUBLESHOOTING

When troubleshooting, always observe the color of the LED.
Problem
No charger 1a. Charger contact is not
indication
1b. No power to the charger.
Blinking Red 2a. Charger contact is not
Indication
2b. Battery is not chargeable.
Table 2. Troubleshooting
What it means...
being made.
being made.
7
What to do...
1a. Check that the radio with battery,
or the battery alone, is inserted
correctly.
1b. Make sure that the power cord is
securely plugged into the
charger and an appropriate AC
outlet, and that there is power to
the outlet.
2a. • Remove the battery from the
charger and replace it back into
the charger.
• Verify that the battery is a
Motorola-authorized battery
listed in Tables 4 and 5. Other
batteries may not charge.
• Remove power from the
battery charger and, using a
clean dry cloth, clean the gold
metal charging contacts of
both the battery and the
charger.
2b. Replace battery.