Kohler 7726 Serie Guia De Instalacion página 4

Before You Begin (cont.)
NOTICE: Risk of product damage. Select non-tapered flathead screws that are galvanized or plated,
consulting with local building codes for the required type of coating. The coating on the screws will
eliminate the occurrence of rust marks on your product.
Observe all applicable plumbing, electrical, and building codes.
This drop-in bath is designed for recessed, island, or alcove installations with an apron.
Accessories that require backing or support are not recommended for this installation.
Do not remove the old bath before you unpack and inspect the new unit.
For remodeling installations: (1) Measure the existing framework before removing the existing bath
to make sure that the new bath will fit in the existing framework. (2) Make sure that the drain
outlet and drain line is in the correct location. (3) Do not remove the existing bath until the new
bath is unpacked inspected for shortages or damage. Report any shortages or damage immediately.
Confirm adequate mounting and connection space for the water supply and drain installation.
Keep the liner (provided) in place until construction is complete.
If you encounter any installation or performance problems, please do not hesitate to contact Sterling
at 1-888-STERLING in the USA or 001-877-680-1310 in Mexico.
Sterling reserves the right to make revisions in the design of products without notice, as specified in
the Price Book.
1139487-2-F 4 Sterling