Astralpool WRC Manual Técnico. Puesta En Marcha Y Funcionamiento página 14

The display of the controller in the machine will show "OFF"
And the display of the WRC the Off symbol:
Pressing the On / Off button, the machine will start
working.
S
In order to set the water temperature, press the "S" button and use the
Increase/Decrease Temperature Setting Buttons to adjust the Water
Temperature Setting.
+ Water Temperature Setting
- Water Temperature Setting
Then press again the "S" button and the setting will be sent to the
machine.
28 °C
SET
21 °C
S
The current Water Temperature is shown in the
display.
To update this data, the Set button must be pressed
twice.
28 °C
SET
21 °C
S
Set Button
14