Festo CLR Serie Instrucciones De Utilizacion página 26

CLR−...
Fitting the CLR−...
Place the CLR−... so that no objects project into the swivel range of the
S
clamping finger.
Select one of the fastening possibilities listed in the following table:
S
With two screws with foot fastening
type HNA−... in the threaded holes of
the cover screws
Fig. 15
The different product sizes have connector threads of the following design and
with the following tightening torques:
CLR−...
Connector thread
Tightening torque
[Nm]
Fig. 16
Tighten the fastening screws equally.
S
26
With four screws in the threaded
holes of the cover screws:
12 16 20
M4 M4 M5
2,5 2,5 3
with flange plate type FNC−...
Direct fastening
25 32 40
M5 M6 M6
3 6 6
Festo CLR−... 0406a English
50 63
M8 M8
11 11