Festo CLR Serie Instrucciones De Utilizacion página 28

CLR−...
7 Commissioning
Warning
Uncontrolled moving masses can cause injury to people or damage to objects in
the area of movement (squashed fingers, eye injuries).
S Make sure that nobody can place his/her hand in the operating range of the
clamping finger and that there are no objects in this range, in order to avoid
the risk of injury to human beings and damage to property (e.g. by providing
a protective screen).
Please note
Transverse loadings during the swivel movement can damage the bearings.
S Make sure that the clamping finger clamps only level and resting parts in its
end position.
The clamping procedures listed in the following table are not permitted:
Clamping moving parts
Fig. 20
Make sure that the maximum limits of all loads are not exceeded.
S
If set correctly, the clamping finger must reach the end position safely without
knocking hard against it.
28
Clamping within the
swivel procedure
Clamping on a diagonal
surface
Festo CLR−... 0406a English