Control panel
1
On:
Turns the product on or off. When the product is off, a minimal amount of power is still used. To
completely remove power, turn off the product, wait for the light to go out, then unplug the power cord.
Wireless:
Turns the wireless radio on or off. The wireless button light indicates if the wireless radio is turned on
or off.
3
Wireless antenna icon:
Indicates if the HP Printer is connected to a wireless network.
4
Wireless error icon:
Flashes if there is a wireless connection error.
Wireless signal strength icon:
5
Indicates the signal strength of the wireless network connection. Fewer signal bars indicate lower
signal strength. When the printer is trying to connect, the signal strength bars will alternately flash from
left to right.
6
Ink level LCD:
Shows estimated ink level.
7
Error light:
Flashes if the HP Printer has an error such as an open print cartridge door or a stalled print carriage.
8
Cancel:
Cancels the current active printing, or alignment job, or WPS session in progress.
9
Resume:
Instructs the HP Printer to continue after a problem is solved. The Resume button light flashes to indicate
errors such as paper jam and out of paper.