General Cautions; Cautions On Installation - Clarion NX501E Manual De Instrucciones Y De Instalación

3. General Cautions

1. Do not open the case. There are no user- serviceable
parts inside. If you drop anything into the unit during
installation, consult your dealer or an authorized
Clarion service center.

4. Cautions on Installation

1. Prepare all articles necessary for installing the
source unit before starting.
2. This model features an operation panel that slides
forward.
On some types of cars, the operation panel may
make contact with the dashboard or gearshift
lever, in which cause it cannot be installed. Before
installing, check that the unit will not hamper
operation of the gearshift lever or obstruct your view
before selecting the installation location. (Figure 2)
NZ501E
Dashboard
Gearshift lever
(Check that it does not
touch the LCD)
Figure 2
3. Install the unit within 30° of the horizontal plane.
(Figure 3)
NX501E
NZ501E
Figure 3
60 NX501E/NZ501E
2. Use a soft, dry cloth to clean the case. Never use
4. If you have to do any work on the car body, such as
5. Use the enclosed screws for installation. Using
Gearshift lever
a rough cloth, thinner, benzine, or alcohol etc. For
tough dirt, apply a little cold or warm water to a soft
cloth and wipe off the dirt gently.
drilling holes, consult your car dealer beforehand.
other screws can cause damage. (Figure 4)
Chassis
Max. 8 mm (M5 screw)
Figure 4
Chassis
Damage