Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Reassembly
Reassembly steps
1.
Insert each side of the cushion into the sockets of the mask frame.
Ensure the cushion is oriented correctly. The arrows on the cushion
should be pointing up towards the plug tether. The raised vented area
of the cushion should also be sitting up against the mask frame.
2.
Pull the arms of the cushion through until the collar of the cushion
shoulder is sitting against the mask frame.
3.
Replace the plug into the appropriate side of the cushion.
4.
Insert the combined elbow and air tubing into the other side of the
cushion, ensuring that it is fully inserted.
5.
Reattach the headgear. Refer to the Attaching the headgear
illustrations in this user guide.
1
3
14
2
4
Publicidad
Tabla de contenido
