Care and cleaning
Care and Cleaning
disassembling it for cleaning. Never immerse the unit in water or any other liquid.
•
Clean the product after each use.
•
Remove the temperature control thermostat. DO NOT immerse the temperature
control thermostat or wok in liquids.
•
CAUTION: Temperature control thermostat probe must always be completely dry
before use.
•
NOTE: The Electric Wok does not have any dishwasher-safe components.
•
Wipe the surfaces with a soft cloth moistened with warm water and mild
detergent. Then rinse with a soft cloth dampened with warm water. Dry
thoroughly. DO NOT immerse the Electric Wok or cord in water or any other liquid.
STORAGE
•
Clean all parts thoroughly (see chapter "Care and Cleaning").
•
Store the Wok in a clean and dry place. We recommend putting the Wok back in
its original packaging.
•
Keep the Wok out of reach of children.
•
Allow the unit to cool down completely before storing. Store your Electric Wok
in a dry location, such as on a tabletop or counter top, or on a cupboard shelf.
Wind the electrical cord into a coil and secure with a twist fastener. For conve-
nience, the temperature controller and cord can then be stored inside the wok.
•
For proper care of your Electric Wok, follow the following steps if stubborn
stains appear:
1. Sprinkle some baking soda on the stained area.
2. Add enough water to moisten the baking soda, making a paste like texture.
3. Let sit for a few minutes (for tougher stains let sit up to an hour).
4. Lightly scrub with a plastic scouring pad or damp cloth and dry thoroughly.
5. Repeat if necessary.
6. Should any stubborn stains appear, they will not affect the performance
and non-stick quality of the non-stick coating.
SAVE THESE INSTRUCTIONS
Keep the user manual for future reference.
10
WARNING: Always unplug the Electric Wok
from the electrical outlet and allow the parts
to cool completely before storing the unit or
CAUTION: DO NOT use abrasive cleaners of
any kind on any part of your Electric Wok.
Abrasive cleaners or cleaning tools can dam-
age non-stick surfaces and plastic parts.