Vornado 133 Guia Del Propietario página 12

CLEANING
GRILL REMOVAL (MODELS 533, 633, 683, 753)
WARNING: To reduce the risk of electrical shock and injury to persons, unplug the circulator before removing grill.
1. Remove the 3 screws located in between
the ribs of the inlet grill at roughly 10, 2,
and 6 o'clock positions. Screw locations are
also indicated with an arrow* (
circulator. Do Not remove the 2 screws
on the pivot arms. Release the Front Grill
Clips located at the 2, 5, 7 and 10 o'clock
positions.
2. Dust or wash Front Grill with a mild dish-
washing soap. Do not place grill in the
dishwasher. The excessive heat can distort
the plastic.
3. To reattach - align the Front Grill Clips with
the holes and firmly snap each clip back
into place. Replace all the screws.
*Model 753 does not have arrow indicators.
Use the brush attachment on your household
vacuum cleaner to vacuum any accumulated
dust off the Front Grill and Air Inlets.
12 English
Front Grill Clip
’
) on the Screw
Front Grill Clip
Screwdriver required.
Screw
Front Grill Clip
Screw
Note: The motor
is permanently
lubricated and
requires no oiling.
Front Grill Clip