Fulgor Milano FCLHD 8041 HID TS BK Instrucciones Para La Instalación Y Uso página 21

0 4
comes on.
e 4
and a number come
on.
7
comes on.
e 0 3
comes on.
e 2 1
e 0 3
comes on.
e 0 3
comes on.
comes on.
e 0 3 e 0 3 e 0 3
, ,
7 7
or comes on.
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised
Service Centre. Give the data from the rating plate.
There is no cookware on
the zone.
The cookware is incorrect. Use the correct cookware. Refer
The dimension
bottom of the cookware is
too small for the zone.
The cookware does not
cover the cooking zone.
There is an error in the
appliance.
The induction coils are
overheated.
The appliance
overheated. The cooling
fan might be blocked.
Incorrect
configuration.
None
communication
control panel and induction
coils.
Control Panel is wrongly
connected.
7
, , An internal
of the appliance needs
replacing.
Put cookware on the zone.
to "Induction Cooking" chapter.
of the Use
dimensions. Refer to "Induction
Cooking" chapter.
Cover the cooking zone fully.
Disconnect the appliance from
the electrical supply for some
time. Disconnect the fuse from
the electrical system of the house.
Connect it again. If comes on
again,
Service Centre.
Allow the appliance to cool down.
is Allow the appliance to cool down.
Check if objects block the cooling
fan. If comes on again, contact an
Authorised Service Centre.
data New
Contact an Authorised Service
Centre.
or faulty Ensure that connection cable
between is plugged on correctly and
functional.
Connect to correct mains voltage.
component Contact an Authorised Service
Centre.
21
cookware with
contact an Authorised
configuration
correct
needed.