Using The Portable Compressor - ULTIMATE SPEED USKT 60 A2 Instrucciones De Funcionamiento Y De Seguridad

Compresor portátil
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Using the device
will light up red.
17
Attention: Only use the 12 V
cigarette lighter adapter
AC adapter
as supplied with the
20
device!
Note: An undervoltage protection
circuit is installed in the portable
compressor
to protect the device
1
from damage. This prevents a deep
discharge of the portable compres-
sor
and automatically switches
1
the device off once the battery is
fully discharged. In this case, the
device can no longer be switched on
or used. Please re-charge the porta-
ble compressor
1
z Using the portable
compressor
Take off the cover cap for the
accessory compartment
remove the compressed air hose
with threaded connection
Screw the compressed air hose
with threaded connection
the compressed air hose connec-
tion
of the portable compressor
8
(see Fig. B or C).
1
Do not operate the device in a
dusty environment. This is a fire
risk and the device could also be
damaged.
Note: You can either use the
compressed air hose with threaded
72
GB/MT
and
17
, as described.
and
15
.
11
onto
11
connection
directly or use it
11
together with the valve adapters
and
supplied in the scope of
13
14
delivery.
Connecting the compressed air
hose without a valve adapter
Screw the free end of the com-
pressed air hose with threaded
connection
11
connection valve of the inflatable
item.
Connecting the compressed
air hose with a valve adapter
The valve adapters
are located under the cover cap
for the accessory compartment
(see Fig. C).
First screw the required valve
adapter
,
12
13
end of the compressed air hose
with threaded connection
Connect the valve adapters
or
into the connecting valve
14
on the inflatable item (remove
valve cap on inflatable item first
if necessary).
Remove the compressed air
hose
Connection without valve
adapters
,
12
13
compressed connection hose with
threaded connection
valve of the inflatable item.
Connect with the valve adapter
,
or
: First undo the valve
12
13
14
12
directly on to the
,
and
12
13
14
or
to the free
14
.
11
,
12
or
: Screw the
14
off the
11
,
15
13

Publicidad

Tabla de contenido
loading

Tabla de contenido