LaserLiner EasyCross-Laser Green Manual De Instrucciones página 9

– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation,
they should shut their eyes and immediately move away
from the beam.
– Under no circumstances should optical instruments
(magnifying glass, microscope, binoculars) be used to look
at the laser beam or reflections.
– Do not use the laser at eye level (1.40 ... 1.90 m)
– Reflective, specular or shiny surfaces must be covered whilst
laser devices are in operation.
– In public areas shield off the laser beam with barriers and
partitions wherever possible and identify the laser area with
warning signs.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic
compatibility regulations and limits in accordance with
the EMC Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals,
aircraft, petrol stations or in the vicinity of people with
pacemakers – may apply. Electronic devices can potentially
cause hazards or interference or be subject to hazards or
interference.
!
When transporting always switch off all lasers, secure
pendulum and push the slide switch (3) to the right.
Green laser technology
EasyCross-Laser Green
Devices with PowerGreen technology feature
bright green high-performance diodes that
allow very good visibility of laser lines at great
distances, on dark surfaces and in bright
ambient light conditions.
Approx. 6 times brighter than a typical red laser
with 630 - 660 nm
09
EN