Safety Instructions - LaserLiner EasyCross-Laser Green Manual De Instrucciones

Completely read through the operating instructions,
the "Warranty and Additional Information" booklet as
! well as the latest information under the internet link
at the end of these instructions. Follow the instructions
they contain.This document must be kept in a safe
place and if the laser device is passed on, this document
must be passed on with it.
Function / Application
Automatic cross line laser for aligning tiles, wall studding,
windows, doors etc.
– Automatic alignment thanks to magnetically damped
pendulum system
– Additional slope mode for aligning inclines
– Out-Of-Level: is indicated by optical signals when the unit
is outside its self-levelling range
– Self-levelling range 3°, Accuracy 0,5 mm / m
General safety instructions
– The device must only be used in accordance with its
intendedpurpose and within the scope of the specifications.
– The measuring tools and accessories are not toys. Keep out
of reach of children.
– Modifications or changes to the device are not permitted,
this will otherwise invalidate the approval and safety
specifications.
– Do not expose the device to mechanical stress, extreme
temperatures, moisture or significant vibration.
– The device must no longer be used if one or more of its
functions fail or the battery charge is weak.

Safety instructions

Using class 2 lasers
08
EN
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 515 nm
EN 60825-1:2014/AC:2017