Bluetooth; Pair Bluetooth Devices - SOUNDMASTER DAB970 Manual Del Usario

You can listen to tracks from a media device if it is connected to the unit via Bluetooth. You
need to pair your Bluetooth device with this unit before you connect them for the first time.

Pair Bluetooth devices

Note:
The operational range between this unit and a Bluetooth device is approximately 10 meters

(without any object between the Bluetooth device and the unit).
Before you connect a Bluetooth device to this unit, ensure that you know the device's

capabilities.
Any obstacle between this unit and the Bluetooth device can reduce the operational range.

 If the signal strength is weak, your Bluetooth device may disconnect, but it will re-enter
automatically into pairing mode.
1. Press the " " button repeatedly on the unit or press the "BT" button on the remote control
until "Bluetooth" is displayed to select the Bluetooth function. If the unit is not paired to any
Bluetooth device, the system enters automatically into pairing mode; or you need to press
and hold the "PAIR" button to start pairing.
2. Activate the Bluetooth function on your device and select the search mode. "DAB970" will
appear on your Bluetooth device.
3. To disconnect the Bluetooth function, switch to another function on the unit or disable the
function from your Bluetooth device.
Tips:
 If there is already an existing connection, press the "PAIR" button to re-activate the pairing
mode. The existing connection will be interrupted.
 The unit will also be disconnected when your device is moved beyond the operational
range.
 If you want to reconnect your device to this unit, place it within the operational range.
 If the device is moved beyond the operational range, when it is brought back, check if the
device is still connected to the unit.
 If the connection is lost, follow the above instructions to pair your device again to the unit.
Listen Music from your Bluetooth device
If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you

can listen to music stored on the device through this unit.
If the device also supports Audio Video Remote Control Profile (AVRCP), you can use this

unit's remote control to play music stored on the device.
1. Pair your device with this unit.
2. Play music via your device (if it supports A2DP).
3. Use supplied remote control to control play (if it supports AVRCP).
To pause/resume play, press the "

To skip to a track, press the " " or " " buttons.

®

BLUETOOTH

" button.
12
DAB970 / English Instruction Manual