Epson EMP-S3 Guia De Instalacion página 4

Turning on and Projecting
• When using the "Direct
Power ON" feature, the
power turns on when the
power cable is connected.
• When using above an
altitude of about 1500 m,
set the "Fan Speed" to
"High".
User's Guide "Extended
Menu"
Control Panel
Power Indicator
Reading the Indicators
Lit
Orange Standby
Press
start projecting.
In this mode, you can unplug
the power cable.
Green Warming up
Wait for a short
time (about 30
seconds).
In this mode pressing
no effect.
Green Projecting
Do not unplug the power
cable.
4
Remote Control
Flashing
● No image is projected ●
to
■ For notebooks and computers with liquid
crystal displays
Change the computer's
output source. Hold
down the
press the appropriate
labelled
changing the setting,
has
wait a few seconds for
projection to start.
Computer's "User's
Guide"
* I f t h e i m a g e i s n o t
projected, press
■ For video equipment
Start playback then
press
(Accessory
Power Cable)
key and
key (the one usually
/ ). After
.
.
* For video equipment,
press "play" to star t
playback.
Examples
NEC
Panasonic
SOTEC
HP
TOSHIBA
IBM
SONY
DELL
FUJITSU
Macintosh Set mirror setting
or display
detection.