Descargar Imprimir esta página

Safety.warnings - Beta 1760/RMS Manual Del Usuario

Multímetro de calibración automática

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 84
SAFETY WARNINGS
The.following.safety.information.must.be.observed.to.insure.maximum.personal.safety.
during.the.operation.at.this.meter:
Measurements.beyond.the.maximum.selected.range.must not.be.attempted.
Extreme.care.must.be.taken.when.measuring.above.50.V,.especially.on.live.bus-bars.
To.measure.voltage,.the.instrument.must.not.be.switched.to.a.current.or.resistance.range,.or.to.
the.diode.check.or.buzzer.position.
Circuits.must.be.de-energised.and.isolated.before.carrying.out.resistance.tests.
The.rotary.selector.switch.must.only.be.turned.after.removing.test.connections.
All.external.voltages.must.be.disconnected.from.the.instrument.before.removing.the.battery.
Test.leads.and.prods.must.be.in.good.order,.clean,.and.with.no.broken.or.cracked.insulation.
UK.Safety.Authorities.recommend.the.use.of.fused.test.leads.when.measuring.voltage.on.high.
energy.systems.
Replacement.fuses.must.be.of.the.correct.type.and.rating.
The.instrument.must not be.used.if.any.part.of.it.is.damaged.
Warnings.and.precautions.must.be.read and understood.before.an.instrument.is.used..They.
must.be.observed.during.the.operation.of.this.instrument.
0

Publicidad

loading