Battery Installation - Beta 1760/RMS Manual Del Usuario

BATTERY INSTALLATION

WARNING:
To.avoid.electric.shock,.disconnect.the.test.leads.from.any.source.of.voltage.before.removing.the.
battery.cover..Do.not.operate.the.instrument.with.the.battery.cover.removed
1 Disconnect.the.test.leads.from.the.meter.
2 Open.the.battery.cover.by.loosening.the.screw.using.a.Phillips.head.screwdriver.
3 Insert.the.battery.into.battery.holder,.observing.the.correct.polarity.
4 Put.the.battery.cover.back.in.place..Secure.with.the.two.screws.
Note:
If.your.meter.does.not.work.properly,.check.the.fuses.and.battery.to.make.sure.that.they.are.still.
good.and.that.they.are.properly.inserted.