Installation In Horizontal Sliding Windows - Hisense AP-10CR1SEPS Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

NOTE:The window installation kit can be used with vertical sliding windows between 18'' and 50'' wide.
Foal seal N
(Adhesive
type-shorter)
Cut the foam seal M(adhesive type) &
N (adhesive type-shorter)to the proper
length,and attcah it to the window sash
and frame.
Insert the vent panel assembly,including
extension panels,if needed,into the window
opening.Extend the extension panels,if used.

Installation In Horizontal Sliding Windows

Foal seal M
(Adhesive type)
9
Cut the foam seal A(Non-adhesive type)
to the window width.Stuff the foam seal
A between the glass and the window to
prevent air and insects from getting into
the room.
E or F
Install the Window-lock bracket with a E or F screw as
shown if you need. E screw is suitable for wood window,
F screw is suitable for metal window.
A

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido