Install Portable Air Conditioner - Hisense AP-10CR1SEPS Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Install Exhaust Hose and Adapter
1. Roll the air conditioner to selected location. see "Location
Requirements."
2. Stretch the end of the hose. Attach the d
flexible exhaust hose. Turn counter-clockwise until securely
locked into place.
3. Attach the window exhaust adapter to the flexible exhaust
hose. Turn counter-clockwise until securely locked into place.
A. Flexible exhaust hose
B. Window exhaust adapter
4. Insert the d
ummy coupling
conditioner.
5. Slide down to lock the hose into place.
B
D
A. Evaporator air intake
B. D
ummy coupling
C. Flexible exhaust hose
D. Condenser air intake
Window Installation
Your window slider kit has been designed to fit most standard
vertical and horizontal window applications. Roll the air
conditioner to selected location. see "Location Requirements."
1. Attach the window exhaust adapter to the outer slider section
(the piece with the large exhaust hole).

Install Portable Air Conditioner

ummy coupling
A
B
into the slot on the back of the air
C
NOTE: Product must be used with included Duct Window
installation kit for effective cooling.
to the
A
7
A
A. Outer slider section
B. Window exhaust adapter
B

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido