Troubleshooting - HAMPTON BAY HB-7902-02 Guía Para El Uso Y Cuidado

Troubleshooting

Problem Possible Cause
The doorbell does
not sound.
The batteries are not
installed correctly.
The batteries are dead.
The doorbell is not
receiving power.
The doorbell extender
and doorbell are not
synced.
Solution
Make sure the batteries are installed according to the
diagram inside the doorbell extender.
Check the charge of the doorbell extender batteries and
replace if necessary.
Make sure the plug-in doorbell has power.
Sync the doorbell extender and doorbell:
Remove the doorbell extender cover.
Press and hold the button on the doorbell until the
doorbell sounds "Beep-Beep".
Press the button on the inside of the doorbell ex-
tender within 30 seconds. The doorbell will sound a
"Beep-Beep" tone to indicate the doorbell extender
is synced.
Press the button inside the doorbell extender again
to activate the doorbell and ensure the doorbell
extender and doorbell are synced.
8