Ce Declaration Of Conformity - GMC GID850 Manual De Instrucciones

CE Declaration of Conformity

The undersigned: Mr Darrell Morris
as authorised by: GMC
Declares that
Identification code: 360781
Description: 850W Hammer Drill
Conforms to the following directives and standards:
• Machinery Directive 2006/42/EC
• Low Voltage Directive 2006/95/EC
• EMC Directive 2004/108/EC
• RoHS Directive 2011/65/EU
• EN60745-1:2009+A11:2010
• EN60745-2-1:2010
• EN55014-1:2006+A1:2009+A2:2011
• EN55014-2:1997+A1:2001+A2:2008
• EN61000-3-2:2006+A1:2009+A2:2009
• EN61000-3-3:2008
Notified body: Intertek
The technical documentation is kept by: GMC
Date: 29/01/15
Signed:
Darrell Morris
Managing Director
Name and address of the manufacturer:
Powerbox International Limited, Company No. 06897059. Registered address:
Central House, Church Street, Yeovil, Somerset BA20 1HH, United Kingdom.
Specification
Voltage:
Power:
No load speed:
Impact rate:
Chuck:
Max drilling capacity
Metal:
Masonry:
Wood:
Power cord length:
Ingress protection:
Protection class:
Dimensions (L x W x H):
Weight:
As part of our ongoing product development, specifications of GMC products may alter without notice.
Sound and vibration information
Sound Pressure L :
PA
Sound Power L :
WA
Uncertainty K:
Weighted vibration
Impact drill into concrete:
Drill into metal:
Uncertainty K:
The sound intensity level for the operator may exceed 85dB(A) and sound protection measures are
necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the time of exposure
if necessary. If sound levels are uncomfortable, even with ear protection, stop using the tool immediately and
check the ear protection is correctly fitted and provides the correct level of sound attenuation for the level of
sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness, tingling and reduced
ability to grip. Long term exposure can lead to a chronic condition. If necessary, limit the length of time exposed
to vibration and use anti-vibration gloves. Do not operate the tool with hands below a normal comfortable
temperature, as vibration will have a greater effect. Use the figures provided in the specification relating to
vibration to calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to EN60745 or similar international
standards. The figures represent normal use for the tool in normal working conditions. A poorly maintained,
incorrectly assembled, or misused tool, may produce increased levels of noise and vibration.
www.osha.europa.eu provides information on sound and vibration levels in the workplace that may be useful to
domestic users who use tools for long periods of time.
5
230-240V~ 50Hz
850W
0-1100min , 0-3000min
-1 -1
0-16500bpm, 0-45000bpm
Keyless, 13mm (1/2")
13mm
20mm
40mm
2m
IP20
355 x 85 x 210mm
3.19kg
95dB(A)
106dB(A)
3dB
ID=9.02m/s
2
D=2.70m/s
2
1.5m/s
2
GB