Quick guide
initial installation overview
Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary
depending on your TV installation and connection.
1
preparation
Connect an aerial cable to the
ANT terminal (Page 14).
If necessary, insert a smart
card into the Common
Interface slot to watch
scrambled broadcasts (Pages
14 and 25).
Connect the AC cord to the TV
(Page 14).
2
power on and
run the auto
installation
Turn on the power using a on
the TV (Page 16).
Run the initial auto installation
(Page 15).
Language setting
4
English
Italiano
Svenska
Country setting
4
Austria
A
B/G
Finland
FIN B/G
Greece
GR B/G
Channel search setting
4
Digital Search
Start searching
channels
3
Congratulations!
now you can watch tV.
If necessary, adjust the aerial
to attain maximum signal
reception (Page 15).
external devices
Connect external
devices such as a
DVD player/recorder
as instructed (Pages
21–23).
Connect external
audio devices such as
speakers/amplifier as
instructed (Pages 21
and 24).
Analogue Search
Watch tV
Connect