Analogue Channel Settings - Pioneer KURO KRL-46V Manual Del Usuario

Basic adjustment

analogue channel settings

Setup
programme Setup
analogue Setting
You can reconfigure the analogue TV channels settings
automatically or manually.
additional Search
E
Use this menu to add new channels automatically after
auto installation has been made.
• Start searching channels after selecting the colour system
and sound system.
manual adjust
E
Use this menu to set up analogue TV channels
manually.
After selecting "Yes" on the screen, press a/b/
c/d to select the channel you want to set and
then press enter.
Fine
You can adjust the frequency to the desired position.
note
• Adjust while checking the background picture as a
reference.
• Instead of pressing c/d to adjust the frequency, you
can set by directly entering the frequency number of the
channel with 0–9 numeric buttons.
eXample
• 179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
49.25 MHz: Press 4 s 9 s 2 s 5 s enter.
•
Colour sys.
Select the optimum colour system to receive ("Auto",
"PAL", "SECAM").
Sound sys. (Broadcasting systems)
Select the optimum sound systems (Broadcasting
systems) to receive ("B/G", "D/K", "I", "L/L'").
label
When a TV channel sends its Network Name, the
"Auto Installation" detects the information and assigns
a name to it. However, you can change channel names
individually.
1
Press a/b/c/d to select each character of
the new name for the channel, and then press
enter.
2
Repeat step 1 above until the name is fully spelt
out.
note
• The name can be five characters or less.
• If a channel name is less than five characters, select "END"
to set the channel name.
Skip
Channels with "Skip" set to "On" are passed over
when using pk/l even if selected while watching the
image from the TV.
Decoder
When connecting a decoder to the TV, you need to
select "INPUT1" or "INPUT2".
note
• The factory preset value is "Off".
lock
You can block the viewing of any channel.
note
• See "Child Lock" for setting a PIN.
• When "Lock" is set to "On" for a channel, "Child lock has
been activated" displays, and the image and sound of the
channel are blocked.
• When pressing 6 while "Child lock has been activated"
displays, the PIN input window will display. Inputting the
correct PIN unlocks the "Child Lock" temporarily until the
power is turned off.
Sort
E
Channel positions can be sorted freely.
1
Press c/d to select "Yes", and then press
enter.
2
Press a/b/c/d to select the channel you
want to move, and then press enter.
3
Press a/b/c/d to move it to the desired
position, and then press enter.
4
Repeat steps 2 and 3 until all desired channels
are sorted.
erase programme
E
Channels can be erased individually.
1
Press c/d to select "Yes", and then press
enter.
2
Press a/b/c/d to select the channel you
want to erase, and then press enter.
• A message window pops up.
3
Press c/d to select "Yes", and then press
enter to erase the selected channel. All the
subsequent channels move up.
4
Repeat steps 2 and 3 until all desired channels
are erased.