Connecting A Pc; Displaying A Pc Image On The Screen; Selecting The Picture Size - Pioneer KURO KRL-46V Manual Del Usuario

Connecting a pC

Connecting a pC
HDmi Connection
pC
HDMI-certified cable
pC
DVI/HDMI cable
ø 3.5 mm stereo minijack cable
analogue Connection
pC
RGB cable
ø 3.5 mm stereo minijack cable
pC
DVI/RGB conversion cable
ø 3.5 mm stereo minijack cable
note
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 42 for a list of PC signals compatible with
the TV.
• A Macintosh adaptor may be required for use for some
Macintosh computers.
• When connecting to a PC, the input signal type is
automatically detected except 1,024 g 768 and 1,360 g
768 signals. Refer to Selection input resolution on page
40.
Displaying a pC image on the
screen

Selecting the picture size

input 4 or 5
You can select the picture size.
1
Press SCreen SiZe.
•
2
Press SCreen SiZe or a/b to select a
desired item on the menu.
input 6
note
• Connect the PC before making adjustments.
• Selectable picture size may vary with input signal type.
eXample
input 7
item
Full: An image fully fills the screen.
Cinema: For 14:9 letterbox pictures. Bars may appear
on the top and bottom with some programmes.
4:3: Keeps the original aspect ratio in a full screen display.
Dot by Dot: Displays an image with the same number of
input 7
pixels on the screen.
note
• Refer to page 35 for AV signals (480i/480p/576i/576p/
720p/1080i/1080p). The ANALOGUE RGB (PC) terminal
(INPUT7) is not compatible with 480i/576i/1080p signals.
The SCreen SiZe menu displays.
4:3 Full