Bosch 500 Serie Manual De Instalación página 17

Ocultar thumbs Ver también para 500 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Double Oven 30"
Flush installation requires two side cleats to be attached
inside the cabinet frame, recessed from the front.
It is good practice, when oven is installed at the end of a
cabinet run, adjacent to a perpendicular wall or cabinet
door, to allow at least 1/4" space between the side of the
oven and the wall/door.
For oven support, install 2x4's extending front to back flush
with the bottom and the side of the opening. The supporting
base must be well secured to the floor/cabinet and level.
Note:
The conduit box must be located above the unit to facilitate
connecting and servicing.
The cabinet cavity must be plumb and the base must be flat
and level and capable of supporting a weight of at least 390
lbs (177 kg).
Combination Oven and Microwave 30"
Flush installation requires two side cleats to be attached
inside the cabinet frame, recessed from the front.
Top View
It is good practice, when oven is installed at the end of a
cabinet run, adjacent to a perpendicular wall or cabinet
door, to allow at least 1/4" space between the side of the
oven and the wall/door.
For oven support, install 2x4's extending front to back flush
with the bottom and the side of the opening. The supporting
base must be well secured to the floor/cabinet and level.
Note:
The conduit box must be located above the unit to facilitate
connecting and servicing.
The cabinet cavity must be plumb and the base must be flat
and level and capable of supporting a weight of at least 310
lbs (141 kg).
Side View
English 14

Publicidad

Tabla de contenido
loading

Tabla de contenido