Installation Of The Decoder - marklin 58088 Manual De Instrucciones

Installation of the Decoder

We recommend using the 60942 decoder for an
installation. The individual functions must be mapped
separately after installation.
• Remove the roof (see pages 16/17)
• Remove the interface connector plug (see page 19)
• Plug in the decoder
• Put the car back together
• Map the functions
The decoder must be reprogrammed to a function
decoder in order to make use of all of the functions on
the car, or the individual functions must be mapped as
follows:
Button Function, only with the 60942 decoder
Lights front & rear, Outputs 1 to 4
F1 Output 1
F2 Output 2
F3 Output 3
F4 Output 4
F5 Lights, rear
F6 Lights, front
7