Intended Use Of The Product; Contents As Delivered; Safety Notes; Important Notes - marklin 76480 Manual De Instrucciones

Intended Use of the Product

• This signal is designed for installation on H0 digital model
railroad layouts in conjunction with the 76491, 76493, 76494,
76495, 76496, and 76497 signals.
• Use only in enclosed areas.

Contents as Delivered

1 Signal
1 K Track base with a cover
1 grade wedge
1 screw 2 x 10 mm
Installation instructions
Warranty card

Safety Notes

• IMPORTANT! The product has sharp edges and points due to
the way it works.
• Do wiring and installation work only when there is no voltage
present. Failure to adhere to this may cause life-threatening
current and injury.
• This signal is to be operated only with the permissible
voltage (see technical data).

Important Notes

• The operating instructions are a component part of the
product and must therefore be kept in a safe place as well as
for transfer of the product to third parties.
• These distant signals cannot be used together with the
76371/76372/76383/76391/76393/76394 signals.
• Please see your authorized Märklin specialty dealer for repairs.
• Disposing of the product: www.maerklin.com/en/imprint.html
8

Technical Data

• Voltage supply
• Load
• Electrical strength

Functions

• Capable of multi-protocols: fx (MM), mfx**, and DCC
• Characteristics can be changed by means of CVs
• Power supply by means of the home signal.

Signal Installation

The distant signal is connected directly to the home signal (see
Page 22).
16 - 20V
≤ 100 milliamps
max. 40 volts