Getting Started; Inserting / Changing The Batteries; Using The Multifunction Detector - Powerfix Profi Z31385 Instrucciones De Utilización Y De Seguridad

Avoid extreme conditions and temperatures that could
have an adverse effect on the batteries, e.g. radiators.
There is an increased risk of leakage otherwise!
Check regularly that the batteries are not leaking.
Leaked or damaged batteries can cause
chemical burns if they come into contact
with the skin; in such cases you must wear
suitable protective gloves.
Avoid contact with the skin, eyes and mucous mem-
branes if fluid has leaked from the battery. In the
event of contact with battery acid, rinse the affected
area with plenty of clean water and consult a doctor
immediately.
Remove light dirt from the battery and product contacts
with a dry, non-fluffing cloth before inserting the bat-
teries.
Remove the batteries from the product if it is not in use
for any length of time.
Make sure that the polarity is correct when you insert
the batteries. This is indicated in the battery compart-
ment. The batteries can otherwise explode.
Insert the batteries with care. The product can otherwise
be damaged.
Please do not dispose of used batteries in your house-
hold waste but take them to a designated collection
depot for special waste.

Getting started

Inserting / changing the batteries

Note: First remove the protective foil from the device.
Open the battery compartment
appliance.
Remove the used batteries if need be.
Insert two new 1.5 V
battery compartment
Note: Ensure correct polarity. This is indicated in the
battery compartment
Close the battery compartment

Using the Multifunction Detector

tip! Test the device before initial use on a metal pipe
or power line whose position you know exactly.
on the back of the
5
batteries (AAA) into the
.
5
.
5
again.
5
GB/MT 27