Sleep Timer
Buffer
FM Setup
Weather
Local Radio
Setup
Playback Setup
Device
Equalizer
Resume
When Power On
Software Update Update software. If there is an updated software version available, the
Reset to Default
You may change the default DLNA name as you like. The information below is the introduction
of how to setup media streaming from PC or other media server. Study the own instruction of
the software or apps you use to enjoy music streaming if necessary. Make sure the music files
are in the format of MP3, WMA, WAV or AAC for music streaming to the radio.
UPnP
➢
Connect the PC to the network.
➢
Ensure the Radio is powered on and connected to the same network.
Turn off or set the sleep timer of 15/30/60/90/120/150/180 minutes. Once
the time is set, there will be a bed icon with remaining minutes at the top
right corner and the device will turn to standby then.
Configure the buffer time of the music playback, 2 / 4 or 8 seconds.
Choose the status of FM Radio by 'Set Mono' or 'Set Stereo'
Activate/deactivate the weather forecast for the standby display. Choose
your preferred temperature unit (℉ or ℃) and then proceed entering your
location. When activated, the weather forecast is shown in turns with the
clock display on the standby screen (each 10 secs).
There is a shortcut Local Radio under Internet Radio so that you can easily
go to the station list of your location. You may Manual Setup your location,
or let the system Auto Detect your current location. The system detects the
location according to the IP address of your connected network. Press
"Local Station" to enter this local radio list directly
Select the playback mode of media center - Off (no repeat or shuffle),
Repeat all, Repeat one or Shuffle.
Default device name for DLNA is "AirMusic ". You may rename it for DLNA
setup on the PC or mobile. QR code for download and install "AirMusic"
control App on mobile.
Option to choose from nine different sound effects Normal / Flat / Jazz /
Rock / Soundtracks / Classical / Pop / News / myEQ
The system is default to resume internet radio playback if you were listening
to internet radio or media center before switch off the unit. If turn this setting
off, the system will remain in the main menu when switching on the
unit.
system will notify you. Before starting a software upgrade, ensure that the
unit is plugged into a stable mains power connection. Disconnecting power
during a software update may permanently damage the unit.
Restore the default settings. After the unit is reset, the system will move to
language selection.
DLNA/UPNP
7
IR1450 / English Instruction Manual
.