Reversible Slicing/Shredding Disc Assembly; Mini Bowl And Mini Blade Assembly - KitchenAid KFP715BW0 Manual De Instrucciones Y Recetas

Preparing the Food Processor for Use
Reversible Slicing/Shredding
Disc Assembly
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.
1. Grasp the disc with fingers away from
slicing and shredding blades. For
Slicing, position the single raised-blade
side up; for Shredding, position the
multiple raised-blades side up.
2. Fit center opening of the disc
over the disc stem. Turn the stem
counterclockwise to lock the disc
into place.
3. Place assembled disc and stem on the
power shaft. It may be necessary to
slightly rotate the disc so that it aligns
properly and falls into place.

Mini Bowl and Mini Blade Assembly

1. Place the mini bowl inside the work
bowl over the power shaft. Rotate the
mini bowl until it falls into place.
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.
2. Fit the mini blade on the power shaft.
It may be necessary to rotate the blade
until it falls into place.
3. To remove the mini bowl after
processing, lift the bowl using the two
finger grips located along the top edge
of the bowl.
9
Continued on next page