User Instructions - Easy Home AS01 Manual Del Usuario

User instructions

How to use as an upright vacuum
1. Make sure the vacuum is turned to OFF (0) and unplugged during assembly.
The handle must be locked in the upright position.
2. Once the vacuum is assembled, make sure the dust container, filter and its
protective cover is in place.
3. Press the ON (I) switch, on the front of the detachable base to turn the
vacuum ON.
4. Press the OFF (0) switch to turn the vacuum OFF.
5. Unplug the power cord after each use.
How to use as a handheld vacuum
1. Make sure the vacuum is turned to OFF (0) and unplugged during assembly.
The handle must be locked in the upright position
2. Make sure the dust container, filter and its protective cover is in place.
3. Remove the handheld vacuum by pressing firmly on the release button while
pulling on the handle of the detachable base towards you.
4. Press the ON (I) switch, on the front of the detachable base to turn the
vacuum ON.
5. Press the OFF (0) switch to turn the vacuum OFF.
6. Unplug the power cord after each use.
7. Snap back into main body after each use.
How to use the accessories
1. The vacuum head is used for cleaning carpets and floors with the upright
position.
2. The crevice tool can be used for cleaning radiators, corners, edges, drawers
and furniture in the handheld position.
How to empty the dust container
CAUTION: Always be sure that the vacuum is switched to OFF and unplugged
before attempting to empty the dust container.
1. Press the dust container release button to detach the dust container from the
vacuum body. Take out the HEPA filter and turn the dust container upside
down and empty into a waste bin.
8
User instructions